Laser power and energy sensor-meter heads for high energy laser: thermopiles up to 60 J
Check below all available sensors for very high energy density and peak power lasers.
These laser sensors can be chosen in 3 connection options (only one per sensor):
- to an external laser power and/or energy meter (independent measuring console, but with PC connectivity via USB)
- direct to PC or controller via USB
- direct to PC or controller via RS-232
All these products have 3-years warranty. We are distributors of LaserPoint in Spain and Portugal.
Key features of the USB/RS232 laser power and energy sensor heads, thermopiles up to 60J:
- Complete meterless laser measurement systems reduced to the size of a USB memory stick
- Measurement data shown and analyzed on PC.
- Flexibility of USB and RS232 interfacing
- Designed for High Energy Density, High Peak Power Lasers
- Avg.Power and Single Shot Energy Measurement
- Beam Expander associated to High damage absorbers:
*peak power density to 30GW/cm2
*avg. power density to 100GW/cm
*energy density to 30J/cm2
- Energy measurement up to 10 joules with nsec pulses
- NIST and PTB (Physikalisch-Technische Bundesanstalt) traceable Calibrations
Chart of models: thermopile sensors-meters for high energy density lasers:
Calibration wavelengths and ranges:
- "-BB" heads: 400 - 2000 nm
- "-DIF" heads: 365 nm, 1064 nm
If you work with lasers, visit our sections:
- laser safety and protection
- laser beam profile analyzers