Laser power and energy sensor-meter heads for pulsed lasers: thermopiles up to 20 J
Check below all available sensors for high energy density and peak power lasers.
These laser sensors can be chosen in 3 connection options (only one per sensor):
- to an external laser power and/or energy meter (independent measuring console, but with PC connectivity via USB)
- direct to PC or controller via USB
- direct to PC or controller via RS-232
All these products have 3-years warranty. We are distributors of LaserPoint in Spain and Portugal.
Key features of the USB/RS232 laser power and energy sensor heads, thermopiles up to 20J:
- Flexibility of USB and RS232 interfacing
- Complete meterless laser measurement systems reduced to the size of a USB memory stick
- Measurement data shown and analyzed on PC.
- High damage thresholds volume absorbers:
*peak powers to 100GW/cm2
*energy densities to 4J/cm2 @ nsec pulses
- Large Area Detectors to 40 mm
- Avg.Power and Single Shot Energy Measurement
- NISTand PTB (Physikalisch-Technische Bundesanstalt) traceable Calibrations
Chart of models: thermopile sensors-meters for pulsed lasers:
| | Power range | Max intermitent power (2min) | Energy range | Aperture (mm) | Wl range (µm) |
40 | LPT-10-BB-D25 | 2 mW - 10 W | 15 W | 50 mJ - 10 J | 25 | 0.4 - 5.2 |
41 | LPT-10-UVA-D25 | 2 mW - 10 W | 15 W | 50 mJ - 10 J | 25 | 0.25 - 0.4 |
42 | LPT-10-UVC-D25 | 2 mW - 10 W | 15 W | 50 mJ - 10 J | 25 | 0.19 - 0.25 |
43 | LPT-20-BB-D40 | 40mW - 20 W | 30 W | 100 mJ - 20 J | 40 | 0.4 - 5.2 |
44 | LPT-20-UVA-D40 | 40 mW - 20 W | 30 W | 100 mJ - 20 J | 40 | 0.25 - 0.4 |
45 | LPT-20-UVC-D40 | 40 mW - 20 W | 30 W | 100 mJ - 20 J | 40 | 0.19 - 0.25 |
Calibration wavelengths and ranges:
- "-BB" heads: 400 - 5200 nm
- "-UVA" heads: 250 - 400 nm
- "-UVC" heads: 190 - 250 nm
If you work with lasers, visit our sections:
- laser safety and protection
- laser beam profile analyzers