Lasers for artificial / machine vision, structured light generating lasers, line and pattern generation lasers ... here you will find high quality laser modules, with special options for:
- Homogeneity
- Straightness
- Narrow line
- Depth of field
The original team of Lasiris Stocker Yale has met to form the company Osela and with its new lasers it shows an innovative improvement with respect to the Lasiris series.
Advantages and key options of the Osela lasers in front of the competitors:
- External and fixable focus (standard), very small focus
- Cosine correction / fall-off compensation (-COS) for greater uniformity of line on the sensor (less power in the center of the line)
- Straightness of line: up to 0.03%
- Uniformity along the line: up to 10%
- Line width (thickness): as thin as 5 μm
- Power 5/24 VDC
- Analog / digital modulation: up to 10KHz (standard)
- Electronic linear power adjustment (not in OSE-CompactLine or TTL options)
- Up to 10 possible optical configurations to adapt to the need (line width, depth of field)
- robust stable industrial design: protection agains ESD, over-heating, over-voltage, worng polarity
- low laser safety class (eye-safe) with enhanced high power
Remember that Osela hand polishes the line generating Powell lenses at their factory (unlike the rest of the competitors). Therefore the optical control and quality is the highest one. This, together with the large variety of options make the Osela lasers the best fit for demanding applications.
Applications:
- Line laser
- 2D / 3D laser measurement
- Machine / artificial vision
- Inspection, detection and measurement of structures, roads, geometries, edges, holes, dents, etc.
Here you will find the different diode laser module families for machine / artificial vision and pattern generation applications:
- StreamLine-SL: the most standard line laser for machine vision 2D and 3D, ø19 mm
- CompactLine-CL: mini laser ø10 mm and legth 50 mm
- StreamLine Pulsed-SLP: high power in small StreamLine module (reduced duty cycle)
- Industrial Laser System-ILS: high power machine vision lasers
- FireLine-FL: very high power machine vision lasers
StreamLine Laser-SL (standard module:19 mm diameter)
| Art. | Diode Power (output: ~75%) | Other line optics | Warranty (months) |
| OSE-SL-405-10-S-A/B | 10 mW | C, D, E, F, G, H, J, Q | 12 |
| OSE-SL-405-35-S-A/B | 35 mW | C, D, E, F, G, H, J, Q | 12 |
| OSE-SL-405-100-S-A/B | 100 mW | call | 12 |
| OSE-SL-405-200-S-A/B | 200 mW | call | 12 |
| OSE-SL-450-100-S-A/B | 100 mW | call | 12 |
| OSE-SL-520-10-S-A/B | 10 mW | C, D, E, F, G, H, J, Q | 12 |
| OSE-SL-520-50-S-A/B | 50 mW | C, D, E, F, G, H, J, Q | 12 |
| OSE-SL-520-80-S-A/B | 80 mW | C, D, E, F, G, H, J, Q | 12 |
| OSE-SL-635-5-S-A/B | 5 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-635-10-S-A/B | 10 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-640-25-S-A/B | 25 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-640-45-S-A/B | 45 mW | C, D, E, F, G, H, J, Q | 12 |
| OSE-SL-640-80-S-A/B | 80 mW | C, D, E, F, G, H, J, Q | 12 |
| OSE-SL-640-150-S-A/B | 150 mW | call | 12 |
| OSE-SL-650-5-S-A/B | 5 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-650-10-S-A/B | 10 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-660-35-S-A/B | 35 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-660-50-S-A/B | 50 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-660-100-S-A/B | 100 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-660-130-S-A/B | 130 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-660-160-S-A/B | 160 mW | call | 18 |
| OSE-SL-690-35-S-A/B | 35 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-690-50-S-A/B | 50 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-785-75-S-A/B | 75 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-785-120-S-A/B | 120 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-830-50-S-A/B | 50 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-830-100-S-A/B | 100 mW | C, D, E, F, G, H, J, Q | 24 |
| OSE-SL-830-260-S-A/B | 260 mW | C, D, E, F, G, H, J, Q | 24 |
CompactLine Laser-CL (mini format: 10 mm diameter)
| Art. | Diode Power (output: ~75%) | Other line optics | Warranty (months) |
| OSE-CL-405-10-T-A/B | 10 mW | D, E, G, H, J, Q | 12 |
| OSE-CL-405-35-A/B | 35 mW | D, E, G, H, J, Q | 12 |
| OSE-CL-405-100-T-A/B | 100 mW | call | 12 |
| OSE-CL-450-100-T-A/B | 100 mW | call | 12 |
| OSE-CL-520-10-T-A/B | 10 mW | D, E, G, H, J, Q | 12 |
| OSE-CL-520-50-T-A/B | 50 mW | D, E, G, H, J, Q | 12 |
| OSE-CL-635-5-T-A/B | 5 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-635-10-T-A/B | 10 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-640-25-T-A/B | 25 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-640-45-T-A/B | 45 mW | D, E, G, H, J, Q | 12 |
| OSE-CL-650-5-T-A/B | 5 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-650-10-T-A/B | 10 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-660-35-T-A/B | 35 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-660-50-T-A/B | 50 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-660-100-T-A/B | 100 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-660-130-T-A/B | 130 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-690-35-T-A/B | 35 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-690-50-T-A/B | 50 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-785-75-T-A/B | 75 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-785-120-T-A/B | 120 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-830-50-T-A/B | 50 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-830-100-T-A/B | 100 mW | D, E, G, H, J, Q | 24 |
| OSE-CL-830-260-T-A/B | 260 mW | D, E, G, H, J, Q | 24 |
StreamLine Pulsed Laser-SLP (19 mm module; high power with limited duty cycle)
| Art. | Diode Power (output: ~80%) | Notes | Other line optics |
| OSE-SLP-450-500-T-A | 500 mW | max ducty cycle 40%, voltage call | C (D, H: call) |
| OSE-SLP-450-1000-T-A | 1000 mW | max ducty cycle 20%, voltage call | C (D, H: call) |
| OSE-SLP-450-1500-T-A | 1500 mW | max ducty cycle and voltage call | call |
| OSE-SLP-450-3000-T-A | 3000 mW | max ducty cycle and voltage call | call |
| OSE-SLP-520-500-T-A | 500 mW | max ducty cycle and voltage call | call |
| OSE-SLP-520-1000-T-A | 1000 mW | max ducty cycle 15%, voltage call | call |
| OSE-SLP-642-500-T-A | 500 mW | max ducty cycle 30%, 5V | C, D, H |
| OSE-SLP-642-1000-T-A | 1000 mW | max ducty cycle 15%, 5V | C, D, H |
| OSE-SLP-810-500-T-A | 500 mW | max ducty cycle 40%, 5V | C, D, H |
| OSE-SLP-810-1000-T-A | 1000 mW | max ducty cycle 20%, 5V | C, D, H |
| OSE-SLP-810-1500-T-A | 1500 mW | max ducty cycle call, 5V | call |
| OSE-SLP-810-3000-T-A | 3000 mW | max ducty cycle call, 5V | call |
Industrial Laser System-ILS (high power)
| Art. | Diode Power (output: ~80%) | Notes | Other line optics |
| OSE-ILS-375-200-T-A | 200 mW | | C, D |
| OSE-ILS-405-500-T-A | 500 mW | | C, D |
| OSE-ILS-405-1000-T-A | 1000 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-450-500-T-A | 500 mW | | C, D |
| OSE-ILS-450-1000-T-A | 1000 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-450-1500-T-A | 1500 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-450-3000-T-A | 3000 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-520-500-T-A | 500 mW | | C, D |
| OSE-ILS-520-1000-T-A | 1000 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-642-500-T-A | 500 mW | | C, D |
| OSE-ILS-642-1000-T-A | 1000 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-660-1000-T-A | 1000 mW | | C, D |
| OSE-ILS-670-500-T-A | 500 mW | | C, D |
| OSE-ILS-670-1000-T-A | 1000 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-670-1500-T-A | 1500 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-680-1000-T-A | 1000 mW | | C, D |
| OSE-ILS-690-1000-T-A | 1000 mW | | C, D |
| OSE-ILS-810-1000-T-A | 1000 mW | | C, D |
| OSE-ILS-810-2000-T-A | 2000 mW | | C, D |
| OSE-ILS-810-3000-T-A | 3000 mW | May not work at 100% over the full Temp range | C, D |
| OSE-ILS-810-4000-T-A | 4000 mW | Do not work CW; check max on-time | C, D |
| OSE-ILS-810-8000-T-A | 8000 mW | Do not work CW; check max on-time | C, D |
| OSE-ILS-810-10000-T-A | 10000 mW | Do not work CW; check max on-time | C, D |
FireLineLaser-FL(ultra-high power)
| Art. | Diode Power (output: ~80%) | Notes | Other line optics |
| OSE-FL-405-5W-T-A | 5 W | | C, D |
| OSE-FL-660-2W-T-A | 2 W | | C, D |
| OSE-FL-670-2W-T-A | 2 W | May not work at 100% over the full Temp range | C, D |
| OSE-FL-680-2W-T-A | 2 W | | C, D |
| OSE-FL-808-5W-T-A | 5 W | | C, D |
| OSE-FL-808-8W-T-A | 8 W | | C, D |
| OSE-FL-808-10W-T-A | 10 W | May not work at 100% over the full Temp range | C, D |
| OSE-FL-808-15W-T-A | 15 W | May not work at 100% over the full Temp range | C, D |
Options
| Description | Code | Spec | Availability |
| Modulation Options |
| TTL modulation | -T | 3-5V: no power; 0-2V: 100% | SL |
| Reverse modulation | -RS | 0V: no power; 5V: 100% | SL, ILS, FL |
| Reverse TTL | -RT | 0-0.7: no power; 3-5V: 100% | SL, CL, ILS, SLP, FL |
| Voltage dimmer | V | 0-0.5V: 100% power; 4-5V: 0% | CL |
| Focusing options |
| | C | | SL, (ILS, SLP, FL ask) |
| | D | | SL, CL (ILS, FL ask) |
| | E | | SL, CL |
| | F | | SL |
| | G | | SL, CL |
| | H | | SL, CL (ILS, SLP ask) |
| | J | | SL, CL |
| | Q | | SL, CL (ILS, SLP ask) |
| Line generator options |
| Custom fan angle | | 300€ NRE | SL, CL, ILS, SLP, FL |
| 20% uniformity | -U20 | | SL, CL (ask ILS, SLP) |
| 15% uniformity | -U15 | | SL, CL (ask ILS, SLP) |
| 10% uniformity | -U10 | | SL, CL (ask ILS, SLP) |
| Uniformity printout | | Uniformity profile measurement | SL, CL, ILS, SLP, FL |
| 0.05% straightness | -S05 | | SL, ILS, SLP, FL (CL ask) |
| 0.03% straightness | -S03 | | SL, ILS, SLP, FL |
| Cosine correction | -COS | specify the % center-to-extremes | SL, CL, ILS, SLP, FL |
| Factory PreFocus | -PFxxx | Focus at custom distance | SL, CL, ILS, SLP, FL |
| Factory FixFocus | -FFxxx | Focus fixed and glued | SL, CL, ILS, SLP, FL |
| Safety class | -SFxx | power reduced to meet the safety class; specify class | |
| Electronic and connecting options |
| 24VDC | -24V | Up to 24VDC input voltage (see datasheets) | SL, CL (SLP ask) |
| Microcontroller | -RS232; -RS485; -I2C | Select comm. protocol | SL (ILS soon) |
| Separate driver | -SD | | SL, CL, SLP |
| Separate driver | -SD | | ILS |
| Separate driver | -SD | | FL |
| Adjustment pot | -P | Manual power adjustment screw: 20-100% | SL (ILS ask) |
| Custom power cable length | -KCL | Specify length (max 3m; standard 45cm) | SL, CL, ILS, SLP, FL |
| Switchcrat connector | -SWC | 3 pin female locking connector (PN: TA3FLX) | SL, CL, SLP |
| M12 connector | -M12 | 4 pins male | SL, CL, ILS, SLP |
| M8 connector | -M8 | 4 pins male | SL, CL |
| DC-DC box | -DCXX | | SLP, CLP |
| Specialized optics options |
| Perpendicular elbow | -ELBPP | Line perpendicular (PP) to laser body (60% max) | CL ask |
| Parallel elbow | -ELBPL | Line parallel (PL) to laser body (45% max) | CL ask |
| Telecentric 10 mm | -10mm | TLP prefix; select fixed focus | SL call (ILS, SLP ask) |
| Telecentric 60 mm | -60mm | TLP prefix; select fixed focus | SL call (ILS, SLP ask) |
| Telecentric 100 mm | -100mm | TLP prefix; select fixed focus | SL call (ILS, SLP ask) |
| Field corrector | -FC | TBD | SL, ILS, SLP |
| Micron focus | M | Specify FA nad WD 25, 50, 75 or 90 mm | SL, ILS, SLP |
| Mechanical options |
| Z laser threaded equivalent M18 | -M18 | Only valid with TTL or RTLL | SL (SLP ask) |
| Dust proof IP65 | -IP65 | Incl. factory fixed focus; specify focus distance | SL, ILS, SLP |
You probably need laser protection goggles when using these lasers. Check our table of available models (different filter and frame) or contact us directly
If you need to check or measure in detail the power emitted by these lasers, you can consult the appropriate laser power sensors and meters in this link or contact us directly.
