Power energy sensor laser meter - Laserpoint

More info
Download
Accessories
Comments

Laser sensor head - meter for power and energy of single pulses: 100 mW - 40 W
- energy: 300 mJ - 200 J
- cooling: air
- 3 years warranty

This laser sensor can be chosen in 3 connection options (only one per sensor):
- to an external laser power and/or energy meter (independent measuring console, but with PC connectivity via USB)
- direct to PC or controller via USB
- direct to PC or controller via RS-232
Ask also for OEM sensors for integration in your system or machine with lasers.

Full specifications LPT-A-40/200-D40-HPB (-U / -RS)

Power Mode
Max. Average Power	40 W
Max. Intermittent Power (1)	200 W
Min. Power	100 mW
Power Resolution	10 mW
Noise Equivalent Power (NEP)	5 mW
Response Time (0-90%)	2.5 sec
Power Calibration Uncertainty	3%
Power Linearity (2)	1%
Single Shot Energy Mode
Max. Energy (with 100 ms pulse)	200 J
Min. Energy	300 mJ
Energy Resolution	1 mJ
Energy Calibration Uncertainty	5%
Absorber Specs
Aperture	40 mm
Type	HPB
Absorber Spectral Range	0.19 - 11 m
Calibration Spectral Range	0.19 - 2.1 m, 2.94m, 9 - 11 m
Max Power Density (3)	11 kW/cm @40 W
Max Energy Density (3)	5ms pulse width: 36 J/cm 10s pulse width: 1.2 J/cm 10ns pulse width: 0.3 J/cm
General Characteristics
Cooling	Convection
Weight	0.9 kg
Dimension	100 x 100 x 55 mm
Cable lenght - connector	2.5 m - USB / 1.5 m - RS232
Stand and Post	Light Duty Stand Included
Notes
(1). 2 minutes max (2). Detector centrally irradiated @50% of useful surface. (3). Damage thresholds also depend on power level. Please see damage graphs for more details.

And here you will find information about all laser power and energy sensors, divided into power ranges:
- standard sensors (usual thermopiles and photodiodes for standard appllications)
- fast, high speed sensors (also valid for ultrafast lasers, like picoseconds or femtoseconds)

If you use lasers you might also need:
- laser safety eyewear
- other laser protection products
- laser beam profile analyzers