Laser power and energy sensor-meter heads: thermopiles for KW
Check from the next paragraph all sensors available for high power up to 12 KW, but before... meet the NEW LPT-EXTREME-20 SENSOR FOR LASER POWER MEASUREMENT UP TO 20 KW.
The laser sensors up to 12 KW can be chosen in 3 connection options (only one per sensor):
- to an external laser power and/or energy meter (independent measuring console, but with PC connectivity via USB)
- direct to PC or controller via USB
- direct to PC or controller via RS-232
All these products have 3-years warranty. We are distributors of LaserPoint in Spain and Portugal.
Key features of the USB/RS232 laser power and energy sensor heads, thermopiles up to 12KW:
- Flexibility of USB and RS232 interfacing
- Complete meterless laser measurement systems reduced to the size of a USB memory stick
- Measurement data shown and analyzed on PC
- Water Cooled Heads to 12KW for continuous use
- Super Hard Coatings : up to 12KW/cm2 at 1KW of laser power
- Energy damage threshold up to 250J/cm2
- EMI rejection
- NISTand PTB (Physikalisch-Technische Bundesanstalt) traceable calibrations
Chart of models: thermopile laser sensors-meters up to 12KW:
Calibration wavelengths and ranges:
- "-SHC" heads: 200 - 1100 nm; 9000 - 11000 nm (only 1.06 um, 10.6 um for LPT-W12K)
- "-HPB" heads: 1900 - 2100 nm; 2.94 um; 9 - 11 um
(*): Only available with USB connectivity
If you work with lasers, visit our sections:
- laser safety and protection
- laser beam profile analyzers