Light Source Accessories

STN-SL1B

Replacement bulb for STN-SL1 Tungsten light source

STN-SL1-BAT

Optional +5VDC interface for BP1 battery operates 2 hours with spectrometer. Users can achieve complete portability with the BP1 battery pack for the spectrometer and the STN-SL1-BAT.

STN-LENS-DCX

Lens for Installing in filter nose base for 7-10x gain. Available for STN-SL1-Filter

STN-Filter-ND50

~0.5 inch diameter 50% T neutral density filter

STN-Filter-AT7

0.5 inch diameter sanded fused silica attenuation filter ~7%T

STN-UP12V

12V power supply. Required for STN-SL1, STN-SL1-Filter, STN-SL1-CUV, STN-SL1-CAL.

STN-UV-LED KIT

Add on a set of 3 UV LEDs: 295, 345, & 365nm to STN-SL1-LED

STN-UV-LED

1 additional UV LED (choose one between 295, 345, 365, and 390nm) for STN-SL1-LED

STN-SL1-BAT

Option that adds a jack to the SL1 so it can be powered from 5VDC. Users can achieve complete portability with the BP1 battery pack for the spectrometer and the STN-SL1-BAT.

STN-SL2-YCABLE

Allows operation of STN-SL2 and spectrometer from same +5VDC power adapter.

STN-UP5V

5V power supply. Required for STN-SL2.

STN-SL3B

Replacement bulb for STN-SL3 Deuterium light source (item must be returned for installation)

STN-LENS-DCX

Lens to install in filter nose base for increasing the deuterium lamp intensity 7-10x gain. Highly recommended for highly absorbing samples and reflectance measurements.

STN-Filter-U330

0.5 inch diameter filter for remove deuterium spikes

STN-Filter-ND50

~0.5 inch diameter 50% T neutral density filter

STN-Filter-AT7

0.5 inch diameter sanded fused silica attenuation filter ~7%T

STN-F400YBNIRUVSR

400um fiber optic Y cable bundle, 0.5 meter, solarization resistant connects STN- SL1 + STN-SL3

STN-SL1B

Replacement bulb for STN-SL1 Tungsten light source

STN-SL3B

Replacement bulb for SL3 Deuterium light source (item must be returned for installation)

STN-SL1-BAT

optional +5VDC interface for BP1 battery operates 2 hours with spectrometer

STN-LENS-DCX

Lens to install in filter nose base for increasing the deuterium lamp intensity 7-10x gain. Highly recommended for highly absorbing samples and reflectance measurements. Available for STN-SL1-Filter.

STN-Filter-U330

0.5 inch diameter filter for SL3 removes deuterium spikes

STN-Filter-ND50

~0.5 inch diameter 50% T neutral density filter

STN-Filter-AT7

0.5 inch diameter sanded fused silica attenuation filter ~7%T

STN-F400YBNIRUVSR

400um fiber optic Y cable bundle, 0.5 meter, solarization resistant connects STN-SL1 + STN-SL3. Required for STN-SL1+SL3.

STN-UP12V

12V power supply. Required for STN-SL1-Filter.

STN-DCX-Lens

Lens for 2-3x gain for STN-SL5-Filter.

STN-UP12V

12V power supply. Required for STN-SL5, STN-SL5-CUV, and STN-SL5-Filter.

STN-IS-Lamp

Calibrated 10-Watt VIS-NIR light source mounted on a 2″ port plug. Includes data USB for 400 -1050nm for total flux Watts/nm. Includes power supply and certificate.

STN-IS-Lamp-HP

Calibrated 50-Watt VIS-NIR light source mounted on a 2″ port plug. Includes data USB for 400 -1050nm for total flux Watts/nm. Includes power supply and certificate. 75W upgrade also available.

STN-UIS-LS-30

30 Watt Upgrade for the STN-UIS-LS

STN-UIS-LS-50

50 Watt Upgrade for the STN-UIS-LS

STN-UIS-LS-75

75 Watt Upgrade for the STN-UIS-LS

STN-UIS-PCM

Power Control Module for STN-UIS-LS with 9 incremental steps to full power. Additional calibration files and luminance data can be provided at each step (STN-UIS-CAL)

STN-UIS-IRIS

Uniform Illumination Sphere Iris set for lamp attenuation with constant Color Temperature (K)

STN-UIS-Spectro

Calibrated BLUE-Wave-VIS spectrometer for monitoring of Uniform Illumination Sphere- Light Source (UIS-LS). Includes optical fiber and NIST traceable calibrations.

STN-UIS-CAL

Irradiance or Radiance calibration file for additional UIS power level.